Laboratory Equipment

Product Details:

Augers are used to collect disturbed solid samples at reasonable dept for laboratory test augers are available in two types and each in different sizes. Blade type (Post Hole) and helical type (screw type) each auger outfit consists one each of auger head, one meter long rod, Tee piece and handle. Depths of  excavating can be increased by using additional extension rods.

a.) Auger head - 150mm diameter
b.) Auger head - 100mm diameter
c.) Auger head - 75mm diameter
d.) Auger head - 50mm diameter
e.) Auger head - 38mm diameter

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN CASE

Product Details:

Augers are used to collect disturbed solid samples at reasonable dept for laboratory test augers are available in two types and each in different sizes. Blade type (Post Hole) and helical type (screw type) each auger outfit consists one each of auger head, one meter long rod, Tee piece and handle. Depths of  excavating can be increased by using additional extension rods.

a.) Auger head - 150mm diameter
b.) Auger head - 100mm diameter
c.) Auger head - 75mm diameter
d.) Auger head - 50mm diameter
e.) Auger head - 38mm diameter

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN CASE

Product Details:

The C.B.R. Method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. Test can be made on all types of soils including sand, gravel crushed stone etc. (Passing through 20mm IS Sieve). C.B.R. test is used extensively for selection of materials and control of sub-grades.

The procedure of test is very simple.  A 50mm dia penetration piston is forced in the test soil and loads required for the penetration to penetrate different depths are recorded by means of a proving ring fixed to the penetration piston assembly and a dial gauge.

Laboratory Model Consists of:
a.) Load Frame 5000 kgf, Bench type, motorised, with 3 speeds :
* Two pillar type.
* Light Weight and Sturdy.
* Can also be used in Mobile Laboratories.

This load frame is designed for conducting unconfined, triaxial, CBR and other routine tests.
Loading system comprises of a screw jack with a detachable handle. The lower platen moves up and down. The top bracket is adjustable for vertical clearance and has an adaptor for connecting standard proving rings or load cells. A   dial gaugee mounting bracket is provided on one of the two pillars. Rate of strain : 1.25, 1.5 and 2.5 mm/min. 230V,single phase A.C. 50 Hz.
Load Frame, Bench type, motorised, with 3 speeds 1.25, 1.5 and 2.5 mm/min 230 V, Single Phase, A.C., 50 Hz.

b.) C.B.R. Mould, 150 mm dia X 175mm high with extension collar and perforated base plate 
Made of Gun-Metal
Made of Mild Steel
Made of Zinc Plated

c.) Penetration piston, face dia 50mm with adjustable bracke

d.) Perforated plate, 148mm dia with adjustable stem and lock nut-Gunmetal

e.) Displacer block, 148mm dia  X 47.7 mm high with detachable handle.

f.) Annular metal weight , 2.5kg. 147mm dia with 53mm dia central hole.

g.) Slotted metal weight 2.5kg  147mm dia with 53mm dia slot.

h.) Metal tripod stand for dial gauges

i.) Cutting colar with chromium plating

j.) Rammer 2.6 kg  weight with a drop of 310mm.

k.) Rammer 4.89 kg weight with a drop of 450mm.

l.) High sensitivity proving ring, 1000 kg capacity fitted with 0.002mm Dial gauge with our own calibration certificate in a nice teak wooden case.

m.) Dial gauge 0.01 mm X 25 mm travel.

n.) Annular metal weight 5kg. 147mm dia with 53 mm dia central hole.

o.) Slotted metal weight 5kg 147mm dia with 53mm dia slot.

Additional Information:

• Packaging Details: wooden box

Product Details:

Consists of a drum made of welded steel having an inside diameter of 300mm x 300 mm long and 450 x 450 mm long, Supported on heavy duty bearings.

An Air and Water tight cover is provide to close the 100 mm wide opening along the entire length of the drum. A reduction gear driven by a motor rotates the ball Mill at 28-30 r.p.m. Supplied complete with twelve 19mm diameter hardened steel balls and an automatic revolution counter. One tray also provided for collecting the sample, operation on 220 volts, single phase, 50Hz, A.C. Supply.