Civil Lab Equipments

Product Details:

For determining the consistency of masonary motor The apparatus consists of a cone with 75 mm base dia and 145 mm high fixed to the lower end of a bearing rod passing freely through a bracket with release machanism.  A dial graduated in mm with rack and penion is provided for measuring the peneration.  Supplied  complete with a plateform and a conical container 150mm top dia x 180mm deep.

Product Details:

It consists of a cylinderical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60 kg , which can be read with respect to the top end of the spring housing . A set of six needle point with area of 645,323,161,65, 32, and 16 mm Sq. are provided.

Product Details:

Determining the aggregate Impact value of coarse aggregate. Consists of a base weighing between 22-30kg with a lower surface of not less than 30cms and support columns to from a  rigid  frame work around the quick release trigger machanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 +  5.0mm.  The hammer is provided with a locking arrangement.  A metal tup (Hammer) weighing 13.5 to 14.0 kg. The lower end in cylindrical shape, 100mm in diameter and 5cm long with a 2mm chamber at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50 mm depth, One measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10 mm in diameter and 230mm long rounded at one end.

Additional Information:

• Delivery Time: 1 WEEK
• Packaging Details: WOODEN BOX