Fitted with a counter to register the number of bellows

Code : RSEP-114

Same as RSEP-067, but unit is electrically operated to give the following 12 rates of stains of strains 1.25, 0.625, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002 mm/min.

The apparatus is suitable for operation on 230 volts single phase A.C. supply. without dial gauge and proving ring.

Code : RSEP-068

• (Stationary Bushing) For 38mm dia specimen.
• Loading pad made of Perspex for 38 mm dia specimens.
• Pair of Plain discs made of Perspex x 38mm dia specimens.
• Pair of Porous stone 38mm dia x 6mm thick.
• Split sand former for 38mm dia specimen
• Sheath stretcher for 38mm dia specimen
• One dozen rubber sheaths for 38mm dia samples.
• For synthetic rubber ‘O’ rings for 38mm dia specimen.
• One plastic drainage tube.

Code : RSEP-040

U-bracket and swivel head. Penetration piston, 50mm dia threaded at the upper end.

Extension rods set consisting of lengths 5cm, 2 lengths 10cm, 1length 30cm, 1 length 50cm, and 1 length 100cm, used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe construction. It stands 30cm high and 45cm wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5 kg, 250mm dia with 53mm dia central hole, slotted metal weight 5 kg, 215 mm to 250 mm dia with 53mm dia slot, 2 Nos, Slotted metal weight 10 kg 215mm to 250mm dia with 53mm dia slot 2 Nos.


Accessories :-

• Dial gauge 0.01mm x 25mm travel
• High sensitivity proving ring, cap 5000 kg in a nice case our own calibration.

Code : RSEP-220

2000 kg capacity with 6 speeds 230 V, Single Phase, A.C.

Code : RSEP-116

Motorised Similar to RSEP-256 but electrically operated rate of rotation is 1/60 r.p.m
Suitable for operation on 230 Volts.

Code : RSEP-256

Carries upto 7 sieves of 150mm or 200mm diameter. The shaker is driven by a ¼ h.p (motor through a reduction a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed, the shaker can have a rotary motion. In addition to this gyaratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. a pair of rods and holder are supplied. The holder can be fixed on the top of the upper most sieves and thus the sieve set is firmly held. Suitable for operation on 230 Volts, 50 cycles single phase, A.C. Supply.

Code : RSEP-201

1. Rajco Sieve Shaker ROTAP Motorised
   To make process of sieving simpler and quicker . Rotap sieve shaker is useful. This produces circular shaking of the sieves at the same time the sieves are tapped. The mechanism for imparting circular action and tapping is oil immersed in a tank and is motorized. The shaker can accommodate upto 7 nos. sieve of dia 150mm or 200mm. Suitable operation of 230 volts A.C. supply single phase.
2. Rajco Sieve Shaker Rotap Motorised
   Same as above but fitted with time switch

Code : RSEP-203